PPDL Picture of the Week

October 30, 2017

The Wire Basket Conundrum

Kyle Daniel, Department of Horticulture and Landscape Architecture

 

It has been discussed (sometimes passionately) as long as they have been used: Should I leave the wire basket and burlap or remove it at transplanting?  You can ask ten people in the green industry and you will probably end up with ten different answers in regards to wire baskets.  There is a lot of anecdotal evidence that people use in their answers, but there aren’t many long-term replicated research trials that address this issue.  One of the most recent studies, which was a short-term trial, indicated no differences in growth between wire basket removal, partial removal, or wire basket complete (Koeser, et.al., 2015).  This study followed the plants two and three years after transplanting. 

The point of contention between the ‘leave it vs. remove it’ groups is the effect of the wire basket and burlap on root growth.  Typically, in the Midwest’s climate, natural burlap will degrade relatively quick, along with the welds on the wire baskets.  Treated, or artificial, burlap will not break down, so this type of material should be completely removed, though most nurseries use natural burlap.

Based on available data, the correct method of the wire basket and burlap issue is to completely remove the twine and remove the burlap and basket ½ to 1/3 of the way down the root ball.  This will allow the majority of anchorage roots and root hairs to not be impeded by any foreign objects.  By leaving a portion of the basket, root ball disturbance will be minimized and staking the tree should not be needed.

 

For further reading on proper planting: https://www.extension.purdue.edu/extmedia/fnr/fnr-433-w.pdf


​Click image to enlarge


Figure 1: When planting a tree or shrub in a wire basket, remove the wire and burlap 1/3 to ½ way down the root ball.  Removing the entire wire basket and burlap will cause the root ball to fracture.


Figure 2: Always be sure to remove twine from the top of the root ball.  This will prevent girdling of the trunk.


Figure 3: A tree spade digging a tree prior to being placed in a wire basket.


Figure 4: Burlap placed in wire baskets ready for trees.